
Key takeaways
- Pixcut supports a text watermark or an image (logo) watermark, one per export.
- Size and margin are a percentage of each image’s width, so marks look identical across a mixed batch.
- A transparent PNG logo gives the cleanest result; JPEG logos show their background rectangle.
- Corner placements at 40–70% opacity credit your work without spoiling it.
- Watermarks deter casual reuse and credit you — they are not copy protection.
Why watermark images at all?
Images are copied, reposted and screenshotted constantly. A watermark keeps your name or brand attached to the picture as it travels, so people who see it later can find the source. For photographers, designers, shops and creators, it is a simple way to turn shared images into credited images. It also discourages the most casual kind of reuse, where someone saves a picture and posts it as their own.
It is worth being realistic: a visible watermark in a corner can be cropped off, and determined people can edit out almost anything. Think of a watermark as attribution and a mild deterrent, not as security.
Text or logo?
| Text watermark | Logo watermark | |
|---|---|---|
| Best for | Names, handles, copyright lines, “Sample” labels | Established brands with a recognisable mark |
| Set-up time | Seconds — just type | Needs a logo file, ideally a transparent PNG |
| Look | Clean, readable, neutral | On-brand and distinctive |
| Pixcut controls | Text, colour, size, opacity, position, margin | Logo width, opacity, position, margin |
How to add a text watermark
- Add your images to the Pixcut editor and open the Mark tab.
- Set Watermark type to Text.
- Type your line, for example
© Ana Ruiz 2026or@studionorth. - Pick a Colour. White works on most photos; dark grey suits bright, airy images.
- Set Size. It is a percentage of the image width: 4–6% is subtle, 10% or more is bold.
- Set Opacity. Between 40% and 70% stays readable while letting the photo show through.
- Choose one of the nine Positions and an Edge margin.
- Check the Preview, then process.
If your text is wider than the image allows, Pixcut reduces the font size automatically so the line fits inside the margins. The text uses the Poppins font, the same as this website.
How to add a logo watermark
- Set Watermark type to Image and press Choose logo.
- Select a PNG, WebP or JPEG logo. Like your photos, the logo stays in your browser.
- Set Logo width as a percentage of each image’s width; 12–20% is typical for a corner logo.
- Adjust opacity, position and margin, preview, and process.
Preparing a logo file
- Use transparency. A PNG with a transparent background shows only the mark itself.
- Use enough pixels. A logo around 800–1200 pixels wide stays crisp even on large photos.
- Consider a white version. A white or light logo at reduced opacity works on most photographs.
- Avoid JPEG logos. JPEG has no transparency, so a rectangle of background will appear around the mark.
Choosing the right position
| Position | Pros | Cons |
|---|---|---|
| Bottom right | Conventional, rarely covers the subject | Easy to crop off |
| Bottom left | Balanced with right-aligned captions | Easy to crop off |
| Bottom centre | Clean for symmetrical images | Can sit on a main subject |
| Centre (low opacity) | Hardest to remove | Intrusive; best for proofs and samples |
| Top corners | Avoids platform UI at the bottom of stories | Less conventional |
On full-screen stories and reels, the top and bottom of the screen are often covered by platform buttons and captions. Keep marks a little away from those edges with a larger margin.
Watermarking a batch consistently
Because size and margin are proportional to width, a watermark looks the same on a 1200-pixel web image and a 6000-pixel original. Portrait and landscape images keep the mark in the same corner, at the same relative size. If you crop or resize in the same export, the watermark is added after those steps, so it is never cut off by the crop. The batch guide explains processing the whole queue.
Design tips for watermarks that work
- Subtle beats loud. A small, semi-transparent mark keeps images usable for portfolios and posts.
- Test light and dark images. Preview the brightest and darkest images in your batch; if the mark disappears on one, raise opacity or change colour.
- Keep the text short. A handle or short name is more readable than a full URL.
- Use “Sample” or “Proof” for client previews. A centred mark at 20–30% opacity protects unpaid previews without hiding the work.
- Stay consistent. Use the same position and size across a series so the mark becomes part of your style.
Combining watermarks with other edits
Pixcut applies edits in this order: crop, resize, border, watermark. The watermark is positioned inside the image area, measured from the image edge, so it never sits on a border. You can also convert format and set quality in the same pass — for example, crop to 4:5, resize to 1080 wide, add a 20-pixel white border and a 4% handle, then export JPEG at 88.
Recommended settings by use
| Use | Type | Size | Opacity | Position |
|---|---|---|---|---|
| Portfolio photos | Text (name) | 3–5% | 50–60% | Bottom right |
| Social media posts | Text (handle) | 4–6% | 60–70% | Bottom left or right |
| Brand content | Logo (PNG) | 12–18% | 70–90% | Bottom right |
| Client proofs | Text (“PROOF”) | 15–25% | 20–30% | Centre |
| Stock samples | Logo or text | 20–30% | 25–35% | Centre |
These are starting points. Preview a light and a dark image from your batch and adjust until the mark is clearly readable on both without dominating either.
A worked example: a photographer’s portfolio set
- Add 30 portfolio photos and choose 4:5 for a consistent shape.
- Resize to width 1600 and export JPEG at 88.
- In Mark, choose Text, type
© Lena Ortiz, colour white, size 4%, opacity 55%, position bottom right, margin 3%. - Preview the brightest photo. If the white text disappears against a bright sky, switch the colour to a soft grey such as #E4E7EC and raise opacity to 70%.
- Process all, check two or three results at full size, and download the ZIP.
Watermark checklist
- Readable on both the lightest and darkest image in the set
- Not covering faces, products or key details
- Away from edges that platforms cover with buttons
- Same position and size across the whole series
- Un-watermarked originals kept safely
Best practices
- Create the mark once. Prepare a clean, transparent logo file and reuse it for every batch so all your images carry an identical mark.
- Write your settings down. Note the size, opacity, position and margin you use so future batches match older ones.
- Keep proofs separate from finals. Use different suffixes, such as
-proofand-final, so watermarked previews never get delivered by mistake. - Respect platform rules. Some marketplaces and stock agencies forbid watermarks on submitted images; check before adding one.
- Prefer credit over obstruction. A clear but modest mark is more likely to be left in place when people share your work.
Common questions
Will a watermark stop people from stealing my images?
It discourages casual reuse and keeps your credit attached, but it cannot prevent copying. Corner marks can be cropped; heavy central marks can still be edited out by skilled people.
Can I add both text and a logo?
Not in one pass. Process once with the logo, download, add the downloaded files back and process again with the text.
Does the watermark change my original file?
No. Pixcut never modifies the files you add. Use a suffix such as -wm to tell versions apart.
Why does my logo have a white box around it?
The logo file is a JPEG or a PNG without transparency. Export your logo as a transparent PNG and choose it again.
What font does the text watermark use?
Poppins, a clean sans-serif typeface. Bold text at the chosen size keeps the mark readable on busy photos.
Can I tile a watermark across the whole image?
No. Pixcut places one mark in one of nine positions. For proofs, a large centred mark at low opacity works well.
Keep your originals. Pixcut never touches the files you add, so you always have an un-watermarked master on your device.
Want to frame images too? See adding borders.
Quick reference
- Type: text for names and handles, a transparent PNG for logos
- Size: 3–6% of the width for text, 12–20% for logos
- Opacity: 40–70% for credits, 20–30% for proofs
- Position: a bottom corner for most uses, centre for proofs
- Margin: 2–4% keeps the mark clear of the edge
Summary
A good watermark is consistent, readable and modest. Decide whether text or a logo suits your work, prepare a clean transparent logo if you use one, and keep the size and position identical across your images so the mark becomes part of your style. Pixcut scales the mark to each image’s width, which keeps a mixed batch consistent automatically. Keep your un-watermarked originals safe, and remember that watermarks credit and discourage casual reuse rather than prevent copying.
Try it now — your images stay in your browser.
Open the Pixcut editor